SmartIdev

postez toutes vos questions relatives aux idevices

Vous n'êtes pas identifié.

#1 05-09-2018 10:28:35

rxz123
Membre
Date d'inscription: 16-12-2016
Messages: 734

Brady Skjei Jersey

Lubrication Characteristics of the Mining Machinery


Mine mining is usually divided into sub-underground mining and open-pit mining; and the characteristics of mining machinery are as follows:

1 Authentic Kevin Shattenkirk Jersey , due to the limited space of mine, mining machinery is asked to be compact in body, small in size, and thus the pressure and load that bearings and gears endure are big;

2, the working conditions and load of mining machinery are changeable, so it should be moveable;

3 Authentic Chris Kreider Jersey , mining machinery are mostly work in heavy-duty or medium-speed or low speed transmission, most of which require frequent starting and often withstand impact loading;

4, the mine environment is harsh and wet with rock dust, coal dust and gas (main component is methane) and some mines are with harmful gases containing sulfur (sulfur dioxide, hydrogen sulfide), so many of the mining machinery have to be fire-proof Authentic Marc Staal Jersey , explosion-proof and anticorrosive;

5, Many impact crusher or hammer crusher are working out of door, so the open-air mining machinery should be able to withstand wind, sun, rain and climate change such as hot in summer and cold in winter;

6, due to small mine space Authentic Kevin Hayes Jersey , machine maintenance is more difficult than that in ground, thus requiring mining machinery to be durable and easy-to- maintain.

The characteristics of the mining machinery make the following requirements to lubricants:

1, the volume of mining machinery and tank are both small with little amount of the lubricating oil and the oil temperature is higher when machine is working, which requires lubricants have good thermal stability and oxidation resistance;

2, because the harsh environment of the mine-- coal dust, rock dust Authentic J.T. Miller Jersey , more water-- lubricating oil is bound to be polluted by these impurities, so it is requested that the lubricant should have good anti-rust, anti-corrosion, anti-emulsifying properties; the performance change of lubricant should be small if contaminated, that is, sensitivity to pollution is small;

3 Pavel Buchnevich Jersey , the temperature in summer and winter or day and night varies greatly, thus open-pit machinery require the lubricant viscosity varies small with temperature—so it is necessary to avoid too low oil viscosity leading to difficulty in forming a lubricating film and cannot achieve the lubrication role in high temperature; but also to avoid starting and operation difficulties because of too high viscosity in low temperature;

4, for some certain mining machinery, particularly used in the place where prone to outbreak of fire and explosion, mine machinery is required to use good lubricant (fire resistant fluid) with good incombustibility, cannot use combustible mineral oil.

5 Brady Skjei Jersey , lubricant should have good adaptability to seals better in order to avoid seals being damaged.

Cheap Jerseys China   Cheap Jerseys From China   Cheap NFL Jerseys From China   Cheap Authentic NFL Jerseys   Cheap New NFL Jerseys   Wholesale Jerseys   Wholesale Jerseys   Wholesale Sports Jerseys   Wholesale Custom Sports Jerseys   Wholesale Jerseys China Free Shipping

Hors ligne

 

Pied de page des forums

Créez Votre Propre Forum
Insérer vos Graphiques
Dictionnaires de Traduction
Hébergé par ForumCrea.com